Description
The D-Link DPE-301GI Gigabit Poe Injector White 1 Port is a device that facilitates deployment of PoE devices where power outlets are not available. It reduces installation and network equipment costs by eliminating the need for electrical wiring, provides power over existing network cabling to PoE devices such as access points, IP cameras, and IP phones, and is lightweight, compact, and easy to install. The DPE-301GI supports Gigabit speeds, and can connect to 10Mbps, 100Mbps, or 1000Mbps through the RJ-45 interface.
- Facilitates deployment of PoE devices where power outlets are not
available - Reduces installation and network equipment costs by
eliminating the need for electrical wiring - Provides power over
existing network cabling to PoE devices such as access points, IP
cameras, and IP phones - Lightweight, compact and easy to install -
Supports 802.3af / 802.3at - 10/100/1000 interface provides
flexibility for all types of connections D-Link's DPE-301GI 1-Port
PoE Injector is used to provide I.T. Professionals with the
benefits of Power over Ethernet (PoE), even when other devices in
the network do not support it. With PoE technology, low voltage DC
power and Ethernet data signals are combined on a single network
cable, which facilitates powering of end devices like IP Cameras,
wireless Access Points (APs), and VoIP Phones. This reduces cable
clutter, eliminates the need for dedicated electrical outlets on
the wall, ceiling, or other unreachable places, reduces
installation time, and lowers costs. The DPE-301GI device supports
Gigabit speeds, and can connect to 10Mbps, 100Mbps or 1000Mbps
through the RJ-45 interface. This device also supports the IEEE
802.3af and 802.3at PoE/PoE+ standards, which ensures
interoperability with other standards-based PoE and PoE+ devices.
Small and compact, the DPE-301GI is lightweight, has integrated
mounting slots, and is easy to install. The DPE-301GI provides a
power and data connection to a PoE device over a single network
cable. It allows I.T. Professionals to mount their PoE devices
virtually anywhere in a building, such as on ceilings or near
entryways, and eliminates the need for nearby power outlets and
attached power supplies. The DPE-301GI combines electrical power
with a Gigabit network connection and produces a Gigabit PoE
signal, allowing a single Ethernet cable to carry both data and
power to a device. Also known as a midspan PSE, the DPE-301GI PoE
injector can be used when deploying a multi-port PoE switch is
impractical or not feasible. It has two 10/100/1000 RJ-45 ports.
One port is for LAN IN, which is the network connection,typically
connected to a non-PoE switch or router. The other port isfor PoE
OUT, which is the connection that provides both power and data
signal to the end device (PD). The DPE-301GI can be located
anywhere on the Ethernet link, although it's typically placed near
the switch/router. Location of the injector does not impact the
maximum 100m (328ft.) distance from the switch/router to the end
device. Support for IEEE 802.3at ensures the DPE-301GI can power
PoE+ devices up to 30W, such as high power 802.11ac APs and IP
cameras with PTZ motors, heaters and blowers.
PoE Injector and
PoE Splitter Tandem Both the DPE-301GI (injector) and DPE-301GS
(splitter) can be used together, as a complete PoE transport
system. This is especially useful when a PoE switch is not
available, and the end device is not PoE capable, but the Network
Administrator still prefers the benefits of PoE. Simply install the
injector close to the network switch, install the splitter close to
the end device, and plug in the cables.
Related Products
