Description
This is a summary of the Craft Rotary Burr Tungsten 6X18X6MM Conical Curve. This tungsten carbide burr is used with pneumatic air tools and electric die grinders and has a double cut cutting length of 18mm. It is curved conical and can be used for a variety of applications, including cleaning welding seams, deburring, grinding, and shaping. The speed at which you use the burr will depend on the material you are using it on and the contour being drilled.
Rotary burr tungsten
Rotary burr to be used with pneumatic air tools and electric die grinders.
SHAPE: Conical
curved
SHANK: *6mm
DIA: *6mm
CUTTING LENGTH: 18mm
METAL: Tungsten carbide
CUT: Double cut
Application:
A tungsten carbide burr can be used for:
Cleaning welding seams
Deburring
Grinding
Shaping
The speed at which you use your tungsten carbide
burr in your rotary tool will depend on the material youre using it on and the
contour being drilled. Its safe to say - do not need to exceed 35,000 rpm.
The benefits of tungsten carbide burrs:
Tungsten carbide burrs can be used on many materials:
All metals
Stone
Ceramic
Porcelain
Hard wood
Reinforced plastics
Tungsten carbide burrs are much harder than HSS (High Speed Steel) burrs and are
used to cut harder materials. The burrs wear less and retain their hardness under
higher temperatures.
If the burrs are chipping, this could be due to the
speed being too slow. It is ideal to start the burr off slow, increasing the speed
as you go along. High speeds will prevent clogging in the flutes of your burrs.
When using burrs, always try to keep the burr on the move.
This will prevent the burr from jabbing and digging into your material causing roughness.
As with all drill bits and burrs, let the burr do
the work and apply little pressure otherwise the cutting edges of the flutes will
chip, reducing the life of the burr.
Related Products
