Craft Rotary Burr Tungsten 12X25X6MM Rnd.point

Brand	Unbranded
Manufacturer	Tork
Model Number	TCBU60612

This is a summary of the Craft Rotary Burr Tungsten 12X25X6MM Rnd.point. This tungsten carbide burr is designed for use with pneumatic air tools and electric die grinders and is round point with a *6mm Shank and *12mm Dia. The cutting length is 25mm and the metal is tungsten carbide. The speed at which you use your tungsten carbide burr will depend on the material you are using it on and the contour being drilled. It is safe to say - do not need to exceed past 35,000 rpm. The benefits of tungsten carbide burrs include that they can be used on many materials, they are much harder than HSS (High Speed Steel) burrs, and they wear less and retain their hardness under higher temperatures.

Rotary burr tungsten
Rotary burr to be used with pneumatic air tools and electric die grinders.
SHAPE: Round point
SHANK: *6mm
DIA: *12mm
CUTTING LENGTH: 25mm
METAL: Tungsten carbide
CUT: Double cut
Application:
A tungsten carbide burr can be used for:
Cleaning welding seams
Deburring
Grinding
Shaping
The speed at which you use your tungsten carbide
burr in your rotary tool will depend on the material youre using it on and the
contour being drilled. Its safe to say - do not need to exceed past 35,000 rpm.
The benefits of tungsten carbide burrs:
Tungsten carbide burrs can be used on many materials:
All metals
Stone
Ceramic
Porcelain
Hard wood
Reinforced plastics
Tungsten carbide burrs are much harder than HSS (High Speed Steel) burrs and are
used to cut harder materials. The burrs wear less and retain their hardness under
higher temperatures.
If the burrs are chipping, this could be due to the
speed being too slow. It is ideal to start the burr off slow, increasing the speed
as you go along. High speeds will prevent clogging in the flutes of your burrs.
When using burrs, always try to keep the burr on the move.
This will prevent the burr from jabbing and digging into your material causing roughness.
As with all drill bits and burrs, let the burr do
the work and apply little pressure otherwise the cutting edges of the flutes will
chip, reducing the life of the burr.