Description
The buff is 230mm in diameter and is made of 100% sheepskin. It is fastened to a rubber backing pad with laces and is used with an automotive polisher to polish a vehicle body panel. Different polishes and waxes can be used with the buff, and it is necessary to polish a vehicle body panel when the panel has been newly painted with a clear-coat, shallow scratch marks need to be removed, and the panel has suffered from oxidation.
Tie on polishing wool buff
Diameter: *230mm
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad's diameter.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
TIP:
The buff is washable after use if the polishing compound is soluble.
Tie on polishing wool buff range:
ORDER NO.
DIAMETER
USE BACKING PAD
MM4
*100mm
MM5
*125mm
TCBP125C /
PG338
MM6
*150mm
TCBP150C
MM7
*180mm
PG33805
MM7-2
*180mm
PG33805
MM8
*200mm
MM9
*230mm
MM9-2
*230mm
MM10
*250mm
Recommended polishing compounds to use:
Liquid Shine
High cut - Features a silicone, wax and filler free polishing
compound to give a high gloss finish on fresh or cured paint. It is capable
of removing P1500 grit sanding marks. It can be used on automotive paints,
marine gel-coats and on composite surfaces.
Liquid Shine
Fine cut - similar to the High cut polishing compound, but it
is designed for use on a ceramic and scratch resistant clear-coat. It is
capable of removing P2000 scratch marks.
Liquid Shine
Zero swirl - Very low abrasive for the final step of polishing.
Removes holograms and swirl marks. Use a soft compounding sponge as a final
step
Related Products
