Description
The Sun Pays Epever LS1024B Solar Charge Controller is a 10A Pwm solar charge controller designed for use with sealed, gel, or flooded lead acid batteries. It features an RS485 interface for communication with other devices, a programmable settings menu, and multiple load control modes. It is designed to operate within the working temperature range of -35C to 50C, and is equipped with extensive electronic protection features.
Features:
12V / 24V Auto Detect
RS485 interface
Programmable settings
Common positive PWM solar charge controller
Multiple load control modes
Full load operation within the working temperature range
Extensive electronic protection
ExcludedPC COMMUNICATION CABLE FOR LS-B / TRACER-B / VS-B SERIES
Specification:
Model Number : LS1024B
Nominal Voltage : 12V DC / 24V DC Auto Detect
Battery Type : Sealed (Default) / Gel / Flooded / User Defined
Battery Input Range : 8 ~32V
Rated Battery Charge Current : 10A
Rated Discharge Current : 10A
Max PV Open Circuit Voltage : 50V
Equalization Voltage :
Sealed : 14.6V
Flooded : 14.8V
User : 9 - 17V
Boost Voltage :
Gel : 14.2V
Sealed : 14.4V
Flooded : 14.6V
User : 9 - 17V
Float Voltage:
Gel/Sealed/Flooded : 13.8V
User : 9 - 17V
Low Voltage Reconnect :
Gel/Sealed/Flooded : 12.6V
User : 9 - 17V
Low VoltageDisconnect :
Gel/Sealed/Flooded : 11.1V
User : 9 - 17V
Self Consumption: < 8.4mA @ 12V / < 7.8mA @ 24V
Temperature Compensation : -3mV/C/2V (default)
Relative Humidity : < 95% non-condensing
Enclosure : IP30
Communication : RS485 (RJ45)
Grounding : Common positive
Operating temperature range : -35C to 50C
Dimensions : 138.6x69.3x37mm
Weight : 0.13kg
Warranty: 2 years
Please take note:
This charge controller is not plug-and-play. It needs to be programmed to the specific system being used (battery settings). This cable need to be purchased for programming.
Recommended for professional and advanced solar users.
Specification Sheet:
User Manual