Description
The Centurion Photon II Semi Wireless Safety Gate Beams are a wireless gate safety beam with a transmitter that is battery-operated and ant-proof. The transmitter has a 30 meter operating range and provides audible feedback for easy setup. The receiver is powered by two AA Alkaline batteries and has a 12-24V AC & 12-30V DC power supply. The receiver has a 30mA @ 12V DC power consumption. The beams are slimline and only 50mm wide, making them easy to install. The beams are compatible with intruder-detection alarms for enhanced perimeter security.
The Centurion Photon II Semi Wireless Safety Gate Beams are a set of infrared gate safety beams with a wireless transmitter.
Photon II makes short work of achieving a safe automation system for even the most challenging of installations, no more tunneling under the driveway as the wireless transmitter only requires two AA batteries (included in the kit) to deliver a minimum of two years of reliable operation.
The Photon II gate beams are only 50mm wide, making them unobtrusive and aesthetically pleasing with a sleek, slimline and elegant design.
FEATURES OF THE PHOTON GATE BEAMS:
The transmitter is wireless and battery-operated saving time and money
Two year battery life using two AA Alkaline batteries (included)
Thirty meter operating range that is ideal for almost any entrance gate.
Fully ant-proof and weather-resistant enclosure for greater reliability
Transmitter provides audible feedback for easy setup and battery-low indication
Low power consumption throughout the system for greater efficiency
Installer Mode with audible feedback makes alignment much easier
Elegant slimline construction and is only 50mm wide
Compatible with Intruder-detection Alarms for enhanced perimeter security
SPECIFICATIONS OF THE PHOTON GATE BEAMS:
Power supply - Transmitter
2 x AA Alkaline Batteries (Supplied) (Only replace with AA Alkaline batteries; do not use rechargeable batteries with this product)
Power supply - Receiver
12 - 24V AC or 12 - 30V DC
Power consumption
30mA @ 12V DC
Battery life
> 2 years
Battery low indication
Audible beep
Specified operating distance
30m
Alignment
Automatic - 1m @ 10m (circular area - assumes parallel surface)
Maximum Operating Distance Photon SMART Receiver to SMART Controller
10m
Output contact
Fail-safe, N/C and N/O, potential free contact
Output contact rating
3A @ 30V DC Non-inductive
Operating temperature
-15C to 65C
Operating humidity
0 - 90% non condensing
Housing material
ABS
Lens material
PC
Degree of Protection
IP54
Dimensions - Receiver
50 mm (L) x 40 mm (W) x 130 mm (H)
Dimensions - Transmitter
50 mm (L) x 40 mm (W) x 130 mm (H)
Product Weight
Packaging dimensions
75 mm (L) x 60 mm (W) x 140 mm (H)
Mass of units packed
239g
Warranty
24 month carry in Manufacturers warranty
Maintenance Ensure that the unit is always clean and free from obstruction. Beams should be checked periodically to ensure they are aligned.
Warnings and Limitations on the Phonton II Gate Beams: All installations must be done by a suitably qualified technician. Product must be used for its intended purpose and under no circumstance may any of the components be modified Only replace with AA Alkaline batteries, do not use rechargeable batteries with this product.
WHAT'S IN THE BOX:1 x Centurion Photon II Semi Wireless Safety Gate Beams
Limitations:The images shown are for illustrative purposes only. Actual product may vary slightly.
Related Products
