Description
The article discusses the use of a polishing wool buff with an automotive polisher. The buff is fastened to a rubber backing pad with laces, and it is necessary to polish a vehicle body panel when the panel has been newly painted with a clear-coat, when shallow scratch marks need to be removed, when oxidation has occurred, or when swirl marks and hologram defects need to be removed. The buff is washable after use.
Tie on polishing wool buff
Diameter: *180mm
Use backing pad:
PG33805
Application:
The polishing wool buff should be used with an automotive polisher.
Different polishes and waxes can be used with the buff. The buff is fastened
onto a rubber backing pad with laces. Make sure the diameter of the polishing buff is
the same as the backing pad's diameter.
It is necessary to polish a vehicle body panel when:
The panel has been newly painted with a clear-coat.
Shallow scratch marks need to be removed.
The panel has suffered from oxidation.
Swirl marks and hologram defects need to be removed.
TIP:
The buff is washable after use if the polishing compound is soluble.
Tie on polishing wool buff range:
ORDER NO.
DIAMETER
USE BACKING PAD
MM4
*100mm
MM5
*125mm
TCBP125C /
PG338
MM6
*150mm
TCBP150C
MM7
*180mm
PG33805
MM7-2
*180mm
PG33805
MM8
*200mm
MM9
*230mm
MM9-2
*230mm
MM10
*250mm
Recommended polishing compounds to use:
Liquid Shine
High cut - Features a silicone, wax and filler free polishing
compound to give a high gloss finish on fresh or cured paint. It is capable
of removing P1500 grit sanding marks. It can be used on automotive paints,
marine gel-coats and on composite surfaces.
Liquid Shine
Fine cut - similar to the High cut polishing compound, but it
is designed for use on a ceramic and scratch resistant clear-coat. It is
capable of removing P2000 scratch marks.
Liquid Shine
Zero swirl - Very low abrasive for the final step of polishing.
Removes holograms and swirl marks. Use a soft compounding sponge as a final
step
Related Products
