Centurion D2 Turbo Sliding Gate Motor

Brand	Centurion
Manufacturer	Centurion
Model Number	RGA021

This is a product description for a Centurion D2 Turbo Sliding Gate Motor. The motor has an exceptional speed of 400mm per second and boasts with a powerful peak push force of 9kgf. The D2 Motor is quick and easy to install and set up, with all settings easily configurable via two dials on the controller.

Product Code: D2TB0000V2

The Centurion D2 Turbo Sliding Gate Operator includes the
controller and base plate. The Centurion D2 Gate Motor is fast,
reliable and affordable. The Centurion D2 Motor has an exceptional
speed of 400mm per second and boasts with a powerful peak push force of
9kgf. The D2 Motor is quick and easy to install and set up, with all
settings easily configurable via two dials on the controller. With
loads of features, the Centurion D2 Turbo is the complete motor for a
standard domestic gate of four meters in length and not weighing more
than





SPECIFICATIONS

Product type: Sliding Gate Motor

Model: Centurion D2 Turbo

Input voltage: 90V - 240V AC 10%, 50Hz

Motor voltage: 12V DC

Motor power supply: Battery-driven (standard capacity - 12V 5Ah)

Current consumption:  (mains) Intergral with controller 1A @ 13.7V
1%

Current consumption: (rated load)      
8/12A

Current consumption: (quiescent load) 95mA

Operator push force:  -
starting           
18kgf

Operating push force:  - rated  8kgf

Gate mass - maximum: 250kg

Gate length:     20m

Gate speed :- m/min:22 - 26m/min

Gate speed - mm/sec: 367 - 433mm/sec

Drive pinion: 17T Module 4

Maximum daily cycle: 10 cycles/day

Design life: 30 000 cycles

Collision sensing: Electronic

Operating temperature: -15 C to 50 C

Degree of protection: IP54

Controller incorporated: D2 Controller_H

Onboard receiver type: Nova code-hopping onboard, multichannel

Receiver frequency: 433.92MHz

Receiver code storage:  capacity 32 transmitter buttons

Dimensions - motor: 244mm(L) x 170mm(W) x 310mm(H)



INSTRUCTIONS FOR USE

- Refer to detailed installer manual.



MAINTENANCE AND CARE

- Ensure that the track is kept clear from stones, dirt or any
obstruction. Gate brushes can be installed to assist in
clearing the obstructions.

- Ensure that the Gate wheels V profile, Gate wheels U
profile or GateshoX run freely.

- Manual override the motor and check that the gate runs freely without
any obstruction.

- Check that the rack is properly secured to the gate and
that it does not press down on the operator pinion at any point while
opening or closing.

- Clean around the motor area to ensure that vegetation does not grow
to close to the motor and pinion.

- Check that the key still opens and closes the camlock and
lubricate if necessary.

- Inspect the inside of the motor by removing the cover and
ensure that it is clear of any insects and dust.



WARNINGS AND LIMITATIONS

- All installations must be done by a suitable qualified technician.

- Under no circumstances may any of the components be modified.



NO REMOTES INCLUDED style=font-weight: bold;>
NO BACKUP BATTERY INCLUDED style=font-weight: bold;>