Description
The author is describing how to set up a dovin canister filter. The author recommends screwing the two valve taps on to the threaded connectors of the pump, cutting the hose to the required length, and fixing them tightly to the valve taps. The author also recommends screwing the union nuts tightly. The author also recommends pressing the pump knob at least 4-5 times to vacuum the air from the filter body and fill up the water. The author also recommends plugging on to electric supply to start the filtering system.
Dophin Canister Filters
Setup Instructions:
To set up, screw the two valve taps onto the threaded connectors of the pump marked IN / OUT.
Cut the hose to the required length and make sure that they do not bend and fix them tightly to the valve taps. Secure the hose connectors on both taps by screwing the union nuts tightly.
The other end of the hose from IN valve tap connect to inlet pipe and the OUT hose from OUT valve tap connect to rain bar.
To start, press the pump knob at least 4-5 times to vacuum the air from the filter body and fill up the water. Stop pressing the pump knob when the outlet pipe is filled with water, then plug on to electric supply to start the filtering system.
Please note these models do not come with a UV.
Related Products
