Description
The Ultrasonic Nebulizer WH2000 is a small, easy-to-use device that produces high-quality fog. It is perfect for hospital and family use, and its small size makes it very convenient. The Ultrasonic Nebulizer WH2000 has two masks- one for inhalation and one for exhalation- and a low-noise fan. It is easy to operate, and its timer and fog volume knobs make it easy to adjust to patient needs.
UltraSonic Nebulizer WH2000
Ultrasonic nebulizer series manufactured bySMARTCARE. The product is reasonable in design, good in fog, quality high in flexibility, small in size and the excellent in profitability. it is even more suitable for hospital and family uses. it's very convenient to use.
Ultrasonic. It can also be used for interior humidification well as family.
Product Detail
For Adult and Pediatric Use
The buoy in water trough must not be lost. If the buoy is dismantled, install it back according to the original orientation, otherwise the instrument can not work normally
When changing the crystal, only turn the nut to loosen or to tighten a screw on the crystal holder instead of turning the head of screw. Make sure that the crystal holder connects with engine tightly, for avoiding leakage of water through the rubber seals, which will damage the instrument.
Two Masks
Please sterilize the parts with 75% alcohol. Do not sterilize in high temperature environment.
During use, the fan blades easily tainted with dust, which should be cleaned regularly.
Low Noise
Please store the instrument in a dry and ventilated place when not in use for a long time. For avoiding the risk of infection and keep normal fog volume, please clean the water trough and wipe the crystal in time after each use.
OPERATIONS
Turn the timer knob on panel to the -off position and the fog volume knob to the "min' position.
Turn the clamps on the cup pedestal and remove cup cover and pedestal, then add distilled water into the water trough until it reaches water lever mark.
Install the medicinal cup pedestal on the water trough and make sure the fixed position is correct. The medicinal cup should be placed inside the pedestal, then add proper aqueous drug into the cup. Cover the cup and turn the clamps to the fix it
Connect bellows as well as spray nozzle or mask with fog outlet of the cover.Turnthe timer knob to the required time and press the power switch to start the instrument. At the same time, the indicator light illuminates. Adjust the fog volume by turning the knob clockwise until the flow rate meets patients requirement the air flow rate volume can also be adjusted for making patientfeel more comfortable with their mouth.
After use, press the power switch to the "off position. Disconnect the plug from powersocket. Put down the drainage tube and drain off water in the water trough.
Unclamp the medication cup unit to remove the cover and the cup as well as the other parts for cleaning. After cleaning. install the pieces in the correct position of the instrument and be ready for the next use.
Related Products
