Description
This kit includes a Hubble AM-4 2.75 kWh lithium ion battery, a Kodak Axpert VM3 3kVa 3000W Pure Sine Wave Off-Grid Inverter with 4000W MPPT Solar Controller, a Battery DC Disconnect Switch, 2x 100A Fuses, and Battery Cables with lugs. The battery has a voltage of 25.0V and a rated capacity of 100Ah. The inverter has a voltage of 24V and a rated capacity of 3kW. The inverter is designed for residential use and has a warranty of 3 years. The battery has a warranty of 1 year.
This kit includes:
1X Hubble AM-4 2.75 kWh Lithium-Ion Battery
1X Kodak Axpert VM3 3kVa 3000W Pure Sine Wave Off-Grid Inverter with 4000W MPPT Solar Controller
1X Battery DC Disconnect Switch
2X 100A Fuses
Battery Cables with lugs
PB-3 AC Protection Box (required for DB Board Installations)
Inverter noise level: Moderate. Please note that this inverter has a fan and should not be placed in low noise areas such as bedrooms or next to a TV.
This kit is unassembled and requires installation by a Qualified Electrician.
Battery Specifications:
AM4 Lithium-Ion Battery - 25V (2.75KW)
Voltage: 25.0V
Rated Capacity: 100Ah
Total Energy: 2.75 KWh
Discharge cut-off voltage: 22.0V
Max. continuous charging current: 100A
Max. continuous discharing current: 100A
C-Rating: 1C
Dimensions (mm): (d) 147 x (w) 375 (h) 371
Weight: 21,0kg
Parallel: Parallel connection up to 15 packs with full comms
Design Life: 15 Years
Cycle Life: 3000 cycles @ 100% DOD Above 6000% @ 50% DOD
Protection: Electronic Circuit Breakers / BMS Voltage Protection / Current Limiting
Advanced BMS with current limiting function
CAN Bus, fully integrates and communicates with leading Inverter brands
Excellent high temperature performance
High Cycle Life and Service Life
Hubble Cloudlink integration ready for cloud monitoring
1C High Performance Lithium battery
High Energy Density and conversion efficiency
Complete with integrated Battery Management System
Compatible with most Inverters and chargers
Low self discharge
Easy wall mount or shelf rack installation
Heavy duty side handles for easy handling and mounting on the wall
Built in protection for over-charge, over-discharge & over-temperature
Inverter Specifications:
Kodak VM 3 3kVa / 3kW Off-Grid Pure Sine Wave Inverter - 24V 3kW
4000W MPPT Solar Controller
Wide DC input range
Battery equalisation function to optimise battery performance and extend lifecycle
Perfect for residential use
Inverter warranty: 3 years
Battery warranty conditions:
d
1.The Battery is intended to be used for standby backup or daily cycling in UPS and Inverter systems including solar Inverters. Other uses for the Battery will void the warranty.
2. A fuse or suitable DC breaker must be installed between the inverter/charge/ups and the Battery or battery bank. Failure to install a suitable rated fuse or DC breaker can damage the Battery and will void the warranty.
3. The Battery is intended to be used indoors only. Outdoor use will render the warranty void.
4. The Battery must not have been contaminated with any foreign or corrosive matter. Contamination will void the warranty.
5. The warranty does not cover damage due to neglect or abuse such as improper installation, freezing, fire, flooding, or any acts of nature.
6. The warranty does not cover surges or spikes from the inverter or charging device that could damage the Battery.
7. If the Battery was installed incorrectly and not according to the manual with correct settings it could result in damage. Incorrect installation
and setup will void the warranty.
8. Incorrect sizing of the inverter, charger, or solar system can damage the Battery and void the warranty.
9. Batteries must be provided with a refresh charge every 5-6 months, while in storage, prior to final installation.
10. Warranty will be void if the firmware or BMS on the device has been deliberately tampered with or to try and reset cycle values or any data for
warranty evaluation purposes.
11. If it is found that the Battery is being overloaded through large current draws above the intended rating of the Battery, which is outside the
intended or indicated specification parameters, the warranty will be void.
For warranty purposes this product must be used / installed in line with the warranty guidelines and user manual.
The warranty will be void if the product is subject to abuse, misuse, unauthorised alteration, incorrect installation or any other physical damage other than ordinary wear and tear. The warranty does not cover user errors and inverter overloading.
Related Products
