Description
The product is an insulated drink can sleeve that can be personalized with sublimation printing. The print area is 9.5x12.8 cm, and the white printable polyester outside and black neoprene inside with side seams are recommended. The sleeve can be preheated to 200C and printed in mirror image. The press should be heated to 200C and pressure applied with a Teflon pad before the sleeve is laid on the teflon pad and the printed side against the sleeve. The sleeve should be covered with protective paper and pressed for 50 seconds with medium pressure. The sleeve can then be removed using a protective glove.
Product Description
Insulateddrink cansleeve you can personalise usingsublimation printing. Keeps liquids at the desired temperature for an extended period of time.
For330-335 mlcans
Print area (per side):9.5x 12.8 cm
White printable polyester outside and black neoprene inside, with side seams
RECOMMENDED INSTRUCTIONS AND PARAMETERS FOR SUBLIMATION PRINTING
Print the design inmirror image
Preheat the press to200C
Place a Teflon pad on the bottom platen of the press to apply even pressure
Lay the sleeve on the teflon pad and the paper's printed side against the sleeve. Fix it with heat-resistant tape
Cover with protective paper
Press for50 seconds, medium pressure
Remove the newly printed sleeve using a protective glove
Carefully take off the paper
Related Products
