Description
The Sola-Prod MPPT charge controller 10A is a solar charge controller that uses advanced MPPT control algorithm to minimize the maximum power point loss rate and loss time. It also has an LCD screen to monitor the running status. The MPPT control algorithm can quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any condition. Additionally, the controller has limited charging power and current over rated range. When the solar panel power exceeds a certain level and the charging current is larger than the rated current, the unit will automatically lower the charging power and bring the charging current to the rated level. The controller also has self-consumption of 15mA (12V) and 10mA (24V) and temperature compensation coefficient of -4mv/C/2V. The controller has IP rating of IP30 and dimensions of 120mm x 75mm x 43mm. The controller weighs 0.29Kg and is packaged in dimensions of 160mm x 90mm x 80mm. The controller has a 12-month limited warranty.
The Sola-Prod MPPT charge controller 10A is based on advanced MPPT(Maximum Power Point Tracking) control algorithm, with an LCD display to monitor the running status.
The MPPT control algorithm can minimize the maximum power point loss rate and loss time, quickly track the maximum power point of the PV array and obtain the maximum energy from solar modules under any condition and can increase the ratio of energy utilization in the solar system by 20 30% compared to a PWM charging method.
The newly designed screen adds the display of battery type and Bluetooth/Wi/Fi, easy for you to check the running status. Limiting the charging power and reducing charging power functions ensures the system stability over PV modules in high temperature environments.With comprehensive electronic fault self-detecting functions and powerful electronic protection functions built inside the controller, component damage caused by installation errors or system failures can be avoided to the greatest extent possible.
FEATURES OF THE SOLA-PROD MPPT SOLAR CHARGE CONTROLLER 12/24V 10A
With the advanced dual-peak or multi-peak tracking technology, when the solar panel is shadowed or part of the panel fails resulting in multiple peaks on the I-V curve, the unit is still able to rack the maximum power point,
Advanced MPPT technology, with efficiency not less than 99.5%,
Maximum DC/DC conversion efficiency of 98%,
Ultra-fast tracking speed and great tracking efficiency,
Advanced MPPT control algorithm to maximize the MPP loss rate and loss time
Limited charging power and current over rated range. When the solar panel power exceeds a certain level and the charging current is larger than the rated current, the unit will automatically lower the charging power and bring the charging current to the rated level.
Support the lead-acid, gel, flooded with the needed Temp. compensation and support lithium batteries start from the solar panel
Power reduction automatically over temperature range
Monitor and set the parameters via App(optional)
LCD Screen
USB Output 5V/2A
SPECIFICATIONS OF THE SOLA-PROD MPPT SOLAR CHARGE CONTROLLER 12/24V 10A
Rated charge current
10A
Battery voltage range
8 - 32V
System nominal voltage
12/24VDC Auto detection except when lithium batteries are used.
Max. PV open circuit voltage
48V at minimum operating environment temperature
Max. PV open circuit voltage
50V at 25C environment temperature
MPP voltage range
(Battery voltage +1V) 45V
Battery Type
Sealed(Default)/Gel/Flooded/LiFePO4/ Li(NiCoMn)O2/ User)
Rated Charge Power
130W/ 12V and 260W/ 24V
LVD
11.0V ADJ 9V12V; x2/24V
LVR
12.6V ADJ 11V ..13.5V; x2/24V
Float Charge
13.8V ADJ 13V ..15V; x2/24V
Boost Voltage
14.4V; ADJ14V..17V; x2/24V
Self-consumption
15mA (12V) and 10mA (24V)
Temperature compensation coefficient
-4mv/C/2V except when lithium batteries are used then compensate coefficient will be 0
IP rating:
IP30
Terminal Scale
6mm/10AWG
Controller dimensions
120mm x 75mm x 43mm
Controller weight
0.29Kg
Packaging dimensions
160mm x 90mm x 80mm
Mass of unit packed
0.45Kg
Warranty
12 months limited Manufacturers warranty
WARNING AND LIMITATIONS ON THE SOLA-PROD SOLAR CHARGE CONTROLLER
Risk of explosion! Never install the controller and an open battery in the same enclosed space. Nor shall the controller be installed in an enclosed space where battery gas may accumulate,
Danger of high voltage! Photovoltaic arrays may produce a very high open-circuit voltage. Open the breaker or fuse before wiring, and be careful during the wiring process,
When installing the Solar Charge Controller 12/24V 10A, make sure that enough air flows through the controllers vents, and leave at least 100mm of space above and below the controller to ensure natural convection for heat dissipation. If the controller is installer in an enclosure, make sure the box delivers reliable heat dissipation effect.
Do not install the unit at a place that is subject to direct sunlight, high temperature or water intrusion, and make sure the ambient environment is well ventilated.
Connect the system in the order of battery f
Related Products
