Description
The LBSA 5.3KWH 104AH 51.2V LIFEPO4 Lithium Solar Ups Battery is a renewable energy storage solution for households. It has a low-voltage DC battery system with an operating voltage of 51.2V and can be used with a low voltage inverter for home energy storage. The battery pack has a built-in battery management system (BMS) that monitors and manages pack and cell information, and can balance cell charging and discharging for longer cycle life. It is compatible with previous LBSA smart batteries and has a cycle life of 7000 cycles at 100% depth of discharge (DoD) until 70% capacity retention. The battery pack has a capacity of 5.3kWh and a maximum continuous load of 100A. It comes with a 10-year warranty or 4500 cycles (9000 cycles on BMS display). The battery cells are made from lithium iron phosphate (LiFePO4) for safety and longer cycle life. The BMS has various protection functions and can monitor charge and discharge states. The battery pack can be expanded by connecting up to 16 packs in parallel with 8 DIP switches. It has a working temperature range of -
More Information
Compatible InverterList:
Deye
Sunsynk
Victron
Luxpower
Growatt
SMA
The LBSA5.3 kWh lithium iron phosphate battery pack is a household renewable energy storage solution developed and produced by Lithium Batteries SA. When fully installed, it is a low-voltage DC battery system with an operating voltage of 51.2V, and works with a low voltage inverter to realize the goal of energy storage for home application.
The battery pack supports parallel connection to expand capacity, which can meet various capacity requirements. It has a built-in battery management system (BMS), which can manage and monitor the pack and cell information - including voltage, current and temperature. What's more, the BMS can balance cell charging and discharging to extend cycle life.
COMPATIBLE WITH ALL PREVIOUS LBSA SMART BATTERIES
Cycle life
7000 cycles @ 100% DoD @ 0.5C @ 25C until 70% (70Ah) capacity retention
Capacity
5.3 kWhMax Continuous Load
Warranty
10 Year or 4500 cycles (9000 Cycles on BMS display)
Features
Battery cell is 3.2V 105Ah aluminium case prismatic cell.
Battery cell is made from lithium iron phosphate (LiFePO4) with safety performance and longer cycle life.
BMS has over-discharge, over-charge, over-current, high and low temperature warning and protection functions.
BMS monitors charge and discharge state, and balance current and voltage of each cell.
Flexible configuration, max. 16 packs can be connected in parallel for expanding capacity and power with 8 DIP switches.
Working temperature range is from -20 C ~50 C (Charging 0 C ~50 C ; discharging -20 C ~50 C ) with excellent discharge performance and cycle life.
Details
CAN Bus Comms: Victron, Growatt, Sunsynk, DEYE, Luxpower, SMA
Bulk + Absorption:56V
Float:54V
Low Voltage Cut Off:44V
Continuous Charge/Discharge For Single Unit:100A
Charge for Parallel Units:(100A * No of units in parallel) / 2
Discharge for Parallel Units:100A * No of units in parallel(Auto when comms to Victron)
Technical Specifications
BasicParameters
Nominal Voltage (V)
51.2V
Nominal Capacity (Ah)
105Ah(> 105Ah)
Nominal Power (Wh)
> 5.2KWh @ 0.4c (tested)
Dimension (mm)
408*362*191mm
Weight (Kg)
49KG
Discharge Cut-off Voltage (V)
44V
Charge Voltage (V)
56V
Max. Charge/Discharge Current (A)
100A
Communication Interface
CAN, RS485
Configuration
16S1P
Working Temperature
0~50C(Charge)
-20~50C (Discharge)
-20~55C (Storage)
Cell chemistry
Lithium iron phosphate (LiFeP04)
Cycle life
80% capacity state after 4800cycles at 0.5C, 25C, 100% DOD
IP level
IP 20
Related Products
