Description
The RCT 12V 100AH LIFEPO4 Battery Senry V-LFP12-100 is a lightweight and cost-effective lithium battery that is suitable for replacing inverter gel batteries. It has a capacity of 100Ah and a Wh of 1280, allowing it to power a typical appliance for approximately 6.5 hours. The battery can be used in parallel or in series, but each battery must be fully charged before doing so. Its maximum constant current is limited by internal electronics and ambient temperature. The battery is made of ABS material and has dimensions of 306mm x 169mm x 215mm and a weight of 10.3kg. It has an IP grade and is classified as BCI Group NO. 27. The battery has a cycle life of 2000 and can operate in temperatures ranging from 10°C to 45°C during charging and -20°C to 55°C during discharge. It has a storage temperature range of 20°C to 30°C and can be stored for up to 12 months at 25°C. The battery has a heating function for charging and has recommended charge and discharge currents of 50A. Its voltage window is 10.8-14.6V and it
RCT 12V 100Ah LiFePO4 Battery
Easy to carry lightweight Lithium 12.8v Battery great for replacing inverter gel batteries. With Wh of 1280 you can power a typical appliance of 150W power draw for approx 6 and a half hours (times may vary).
When the battery needs to be used in parallel or in series, each battery shall be fully charged according to the standard charging method before parallel or in series.
Duration of maximum constant current is thermally limited by internal electronics and depends on ambient temperature.
Specifications:
Iron-V Lithium Iron Phosphate Battery 100Ah
Cost Effectiveness
Longer Service Life
Guaranteed Safety
Fast Charge
Drop-in Replacement
Nominal Characteristics
Case Material ABS
Length (mm) 306
Width (mm) 169
Height (mm) 215
Weight (kg) 10.3
Terminal Type M8
IP Grade
BCI Group NO. 27
Cell Type-Chemistry Prismatic LiFePO4
Mechanical Characteristics
Cycle Life: 2000
Operating Temperature Charge: 10 C ~ 45C
Discharge: -20C ~ 55C
Storage Temperature 20C~30C
Storage Duration 12 months at 25C
Heating Function Charging heating (Optional)
6C, OFF
Operating Conditions
Voltage Window 10.8-14.6V
Max. Continuous Charge Current 100A
Max. Continuous Discharge Current 100A
Peak Discharge Current 200A15s 2s
Recommended charge current/A 50A
Recommended discharge current/A 50A
Charge current cut-off/A 3A
Charge & Discharge Characteristics
Primary Charging Protection Current: >105.0 2.5A
Secondary Charging Protection Current: >125.0A 2.5A
Primary Discharging Protection Current: >105.0 2.5A
Secondary Discharging Protection Current: >210.0A 2.5A
Over-charge Voltage Protection Voltage: >14.8 0.2V
Over-discharge Voltage Protection Voltage:
Related Products
