Description
The product is a metallic silver liner that is easy to use and ideal for a variety of surfaces. The working guidelines state that the surface must be clean and dust-free before application, and that the drying time will depend on the color being used. For fabrics, the product must be washed out first with softening and finishing agents before application. The liner must then be pushed onto the fabric and squeezed, and then dried. The product can also be fixed in a pre-heated oven (8 minutes at 150 degrees Celsius). The product must be tested for heat resistance before use, and then washed and ironed inside out.
Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.
Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.
Related Products
