Description
The text describes the use of a metallic liner and glitter liner. The text also provides working guidelines for using the liners. The text advises that the surface should be clean and dust-free before application of the liner, and that the liner should be allowed to dry for six hours. The text also advises that the liners can be fixed to fabrics by gently pushing the liner tip onto the fabric and squeezing. After drying, the liners can be ironed for three minutes per 30 cm. The text also advises that the liners can be fixed in a pre-heated oven (8 minutes at 150°C). The text advises that the liners should be tested for heat resistance before use and that they should be washed and ironed inside out.
Easy to use, as you paint straight from the liner. Ideal for almost any surface, from paper, wood, metal, glass, leather, plastic, fabrics (wash-resistant up to 40°C after fixing), etc.
Working Guidelines for Marabu-Metallic Liner and Glitter LinerEnsure that the surface is clean and dust-free. Drying time approx. 6 hours depending on colour application. For fabrics (cotton and blended textiles up to a maximum of 20 % synthetic fibres), wash out finishing and softening agents. Gently push liner tip onto the fabric and squeeze. After drying, iron each painted area for 3 min. on cotton setting with a thin cloth over the surface. Iron for 3 min. per 30 cm. Can also be fixed in a pre-heated oven (8 min. / 150°C). Test substrate for heat resistance first. Then wash-resistant up to 40°C. Wash and iron inside out.
Related Products
