Tork Craft Compounding Sponge 150MM X M14 Standard Orange

Brand	Unbranded
Manufacturer	Tork Craft
Model Number	VER/TCCS15014

The compounding sponge is a type of polishing sponge that is used with an automotive polisher. It is necessary to polish a vehicle body panel when the panel has been newly painted with a clear-coat, when shallow scratch marks need to be removed, when the panel has suffered from oxidation, or when swirl marks and hologram defects need to be removed. The compounding sponge uses white, good, orange, good, red, best, and black best polishing compounds. It is available in 150mm x M14 standard orange diameter thread/velcro.

Compounding sponge Pattern: Standard
Density: Firm
Colour: Orange
Diameter: Ø150mm
Thread/Velcro: M14

 Application:

The compounding sponge should be used with an automotive polisher. It is necessary to polish a vehicle body panel when:

• The panel has been newly painted with a clear-coat.
• Shallow scratch marks need to be removed.
• The panel has suffered from oxidation.
• Swirl marks and hologram defects need to be removed.

Compounding sponge uses:

COLOUR POLISH COMPOUND White Good Best Orange Good Best Red Best   Black Best  

Compounding sponge range:

ORDER NO. DENSITY COLOUR DIAMETER THREAD PATTERN SPC00101 Firm Orange *200mm Velcro Standard SPC00100 Soft Yellow *200mm Velcro Standard SPC00102 Soft Red *200mm Velcro Standard TCCS15058 Firm White *150mm 5/8 UNC Standard TCCS15014-1 Firm White *150mm M14 Standard TCCS15014-4 Firm White *150mm M14 Standard TCCS15014 Firm Orange *150mm M14 Standard TCC15014-2 Soft Red *150mm M14 Standard TCCS15014-3 Soft Black *150mm M14 Standard TCCS15014-5 Soft Black *150mm M14 Waffle SPC00124 Firm Blue *125mm Velcro Standard NOTE:
For the *200mm velcro compounding sponges, use the M14 backing pad SPC00106.

Adaptors to convert or lenghten the polisher's thread:

ORDER NO./td> MALE THREAD FEMALE THREAD SPC00055 5/8 UNC 5/8 UNC SPC00053 5/8 UNC M14 SPC00054 M14 5/8 UNC SPC00052 M14 M14

Recommended polishing compounds to use:

• Liquid Shine High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
• Liquid Shine Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
• Liquid Shine Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step