Description
The double sided wool buff is a buff with two sides, one with a thread/velcro closure and one without. It is used with an automotive polisher to polish a vehicle's body panel. Different compounds, polishes, and waxes can be applied to both sides of the buff, and then flipped when needed. The buff is washable after use, and can be used with any polishing compound that is soluble.
Double sided wool buff
Diameter: Ø230mm
Thread/Velcro: M14
 Application:
The double sided wool buff should be used with an
automotive polisher. Different compounds, polishes and waxes can be applied to both sides of the buff and then flipped around when needed. This saves time without the need of changing to another buff. It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
TIP: The buff is washable after use if the compound is soluble.
Double sided wool buff range:
ORDER NO. DIAMETER THREAD MM DS7 Ø180mm M14 MM DS7-2 *180mm 5/8 UNC MM DS9 *230mm M14 MM DS9-2 *230mm 5/8 UNC
Adaptors to convert or lenghten the polisher's thread:
ORDER NO. MALE THREAD FEMALE THREAD SPC00055 5/8 UNC 5/8 UNC SPC00053 5/8 UNC M14 SPC00054 M14 5/8 UNC SPC00052 M14 M14
Recommended polishing compounds to use:
- Liquid Shine High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
- Liquid Shine Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
- Liquid Shine Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step
Related Products
