Description
The buff is a velcro polishing wool buff with a diameter of 180mm. It is fastened to a rubber backing pad with velcro. The buff is meant to be used with an automotive polisher to polish car body panels. Different polishes and waxes can be used with the buff, and it is necessary to polish a panel when it has been newly painted or when shallow scratch marks need to be removed. The buff is also useful for removing oxidation, swirl marks, and hologram defects.
Velcro polishing wool buff
Diameter: Ø180mm
Use backing pad: SPC00119
 Application:
The polishing wool buff should be used with an
automotive polisher. Different polishes and waxes can be used with the buff. The buff is fastened onto a rubber backing pad with velcro. Make sure the diameter of the polishing buff is the same as the backing pad's diameter. It is necessary to polish a vehicle body panel when:
- The panel has been newly painted with a clear-coat.
- Shallow scratch marks need to be removed.
- The panel has suffered from oxidation.
- Swirl marks and hologram defects need to be removed.
TIP: The buff is washable after use if the polishing compound is soluble.
Velcro polishing wool buff range:
ORDER NO. DIAMETER USE BACKING PAD SPC00123 *125mm SPC00120 SPC00125 *180mm SPC00119
Recommended polishing compounds to use:
- Liquid Shine High cut - Features a silicone, wax and filler free polishing compound to give a high gloss finish on fresh or cured paint. It is capable of removing P1500 grit sanding marks. It can be used on automotive paints, marine gel-coats and on composite surfaces.
- Liquid Shine Fine cut - similar to the High cut polishing compound, but it is designed for use on a ceramic and scratch resistant clear-coat. It is capable of removing P2000 scratch marks.
- Liquid Shine Zero swirl - Very low abrasive for the final step of polishing. Removes holograms and swirl marks. Use a soft compounding sponge as a final step
Related Products
