Tork Craft Standard Repl.drill Bit For Mandrels

Brand	Unbranded
Manufacturer	Tork Craft
Model Number	VER/TC00002

The standard pilot drill bit for hole saws is Ø6.35mm and is made of High-speed steel. It is used to replace the pilot drill bit in a hole saw and is tightened with a grub screw. There are also different types of pilot drill bits for different hole saws.

Pilot drill bit for hole saws Drill bit diameter: Ø6.35mm
Drill bit: HSS (High-speed steel)

Application:

The drill bit is a replacement pilot drill bit for Bi-metal hole saws. Replacing the pilot drill bit:

1. Use an Allen key (TC17016) or in some cases a slot-head screwdriver to undo the grub screw securing the pilot drill bit in the mandrel.
2. Replace the pilot drill bit by aligning the flat side on the shank with the grub screw.
3. Tighten the grub screw. Make sure the pilot drill bit is secured.
4. In some cases it would be necessary to remove the hole saw from the mandrel to replace the pilot drill bit.

Mandrel replacement pilot drill bits:

• Ø6.35 x 115mm (extra long) for bi-metal hole saws - TC00001
• *6.35 x 70mm for bi-metal hole saws - TC00002
• Tungsten Carbide Tipped (TCT) series hole saws - TC00003
• Carbide grit hole saws - TC00004
• Diamond coated hole saws - TC00006