Tork Craft Compound 1 - Heavy Duty Cleaning - Hard Metals

Brand	Unbranded
Manufacturer	Tork Craft
Model Number	VER/TC871101

The author is discussing a line of buffing pads and compounds that can be used to clean, polish, and bring to a high gloss, all metals and plastics. The compounds are a heavy duty cleaning compound to be used with a polishing buff, and the buffing pads are for use with a drill or a portable drill with a collar diameter of Ø43mm. The author recommends using a drill press to polish metals, if possible. The author also recommends using the TCV01810 adaptor with a portable drill to polish metals. The author also recommends using a buffing pad that revolves towards you at full speed, and passing the compound lightly across the face of the buffing pad. The author also recommends using a clean piece of scrap metal to eliminate lumps of compound from occurring. The author also recommends using a glove to handle the warm item. If more compound is required, the author recommends applying it using a wiping motion.

Polishing compound

Application:

This is a heavy duty cleaning compound to be used with a polishing buff to clean hard metals:

• Steel
• Iron
• Stainless steel

How to use the compounds and the buffing pads:

1. The adaptor is used to hold the buffing pad in the drill's chuck. Fasten the correct buffing pad in the adaptor. Make sure the flanges are on both sides of the buffing pad.
2. It would be best to use a drill press to polish metals. If a drill press is not accessable, use adaptor TCV01810 with a portable drill with a collar diameter of Ø43mm. Tighten the adaptor in the drill's chuck.
3. The buffing pad should revolve towards you at full speed. Pass the compound lightly across the face of the buffing pad. To ensure that the compound is evenly spread, hold a clean piece of scrap metal against the face of the buffing pad. This will eliminate lumps of compound from occuring.
4. If desired, heat the item to 65°C using an oven or a heater. Warming the metal keeps the compound on the buffing pad. A cool item will draw compound from the pad and leave deposits. Use a glove to handle the warm item.
5. Hold the metal lightly against the buffing pad. Allow the compound to do the work.
6. If more compound is required, apply it using a wiping motion. Do not overload the buffing pad.

Use Tork Craft's line of buffing pads and compounds to clean, polish and bring to a high gloss, all metals and plastics.   HEAVY DUTY CLEANING REGULAR CLEANING LIGHT POLISHING HIGH GLOSS POLISHING Hard metals 1 2 5 6 Soft metals   3 5 6 Precious metals   4 5 6