Description
The Splice Protectors 40MM HSFP-40T 1MM Pin are heat shrinkable fibre optic splice protectors that require a temperature of 110 degrees Fahrenheit for 1 minute for shrinking and an additional 30 seconds for cooling down time before inserting the splice into a tray to allow the meltable adhesive to set. The Splice Protectors 40MM HSFP-40T 1MM Pin have a tensile strength of >10.3 MPa, an elongation at break of 500% and a longitudinal shrinkage of 25KV/mm. The Splice Protectors 40MM HSFP-40T 1MM Pin have a volume resistance of >1015cm and a copper stability of Non-Corrosive. The Splice Protectors 40MM HSFP-40T 1MM Pin have a water absorption of < 0.10%
FEATURES
These heat shrinkable fibre optic splice protectors requires a temperature of 110 for 1 minute for shrinking and an additional 30 seconds for cooling down time before inserting the splice into a tray to allow the meltable adhesive to set. Splice Protectors 40mm HSFP-40T 1mm Pin.Sold in packets of 100.
PRODUCT SPECIFICATIONS
Manufacturer
Scoop
FactoryNumber
FT-HSFP
Product Type
Splice Protectors
Operating Temperature
-45 to 125
Tensile strength
>10.3 MPa
Elongation at break
> 500%
Longitudinal shrinkage
25KV/mm
Volume resistance
> 1015cm
Copper stability
Non-Corrosive
Water absorption
< 0.10%